发货地： 山东济宁
適用于鑄鐵、碳鋼、不銹鋼等黑色金屬的加工，滿足切削、鉆孔攻絲、銑削、龍門銑等加工工藝需求。
超高性价比
三个工作日内发货
24小时在线技术服务
品 名：水溶性切削液
型 號：SGR2342
技術指標：
項目 | 指標 | |
原液 | 外觀（15~35℃） | 均勻透明或半透明液體 |
貯存安定性 | 無分層、無相變 | |
稀釋液 | pH（1：20） | 9.0~10.0 |
防腐蝕實驗 （55℃±2℃）（h） | 一級灰口鑄鐵，A級，不小于48h | |
防銹性實驗 （35℃±2℃）（h） | 鑄鐵單片48h實驗后合格 | |
鑄鐵疊片8h實驗后合格 | ||
消泡性/（ml/10min） | ≤2 | |
性能用途：
適用于鑄鐵、碳鋼、不銹鋼等黑色金屬的加工，滿足切削、鉆孔攻絲、銑削、龍門銑等加工工藝需求。
產品特點：
是一款水溶性切削液，適用于鑄鐵、碳鋼、錳鋼、不銹鋼等黑色金屬的加工。
具有良好的防銹性、極壓潤滑性、冷卻性等特點，綜合性能佳。
產品具有良好的清晰性，且產品本身氣味小，使用壽命長。
使用方法：
液箱和機床清理干凈后，將 SGR2342根據現場工藝要求按照一定比例與水混合后；將配制好的工作液加入液箱內，用油泵打出，噴流于工件切削處。
初次使用本品之前請將機床液箱清理消殺干凈，建議使用純水、自來水配制工作液。
嚴禁使用地下水，過軟和過硬水質請?zhí)崆芭c欣格瑞業務聯系取得技術支持。
切削液系統應有良好的鋁屑和雜質分離系統，保持工作液的純凈和清潔。
嚴禁與其他牌號切削液混用，以保持其優良特性。
包裝貯存：
應密封保存于干燥、陰涼通風庫房內，防止日曬、雨淋及混入雜質，建議貯存溫度 5~35℃。
搬運中應使用適當?shù)难b卸工具，以免包裝破損。
運輸中應用篷布遮蓋，防止陽光直曬。
正常貯存情況下，產品保質期為2年。
規格：18L或 200L。
安全防護：
操作時注意勞動保護，應避免與皮膚、眼睛等接觸，接觸后用大量清水沖洗。
Water-soluble cutting fluid SGR2342
Product Features：
◇SGR2342 is a water-soluble cutting fluid, which is suitable for the processing of ferrous metals such as cast iron, carbon steel, manganese steel and stainless steel.
◇SGR2342 has good rust resistance, extreme pressure lubrication, cooling and other characteristics, excellent comprehensive performance.
◇SGR2342 products have good clarity, and the product itself has a small smell and a long service life.
Product parameters：
Test items | Index | |
Concentrate | Appearance/（15~35℃） | Uniform transparent or translucent liquid |
Storage stability | No delamination, no phase change | |
Diluent （1:20） | pH | 9.0~10.0 |
Anti-corrosion test/ （55℃±2℃）（h） | Gray cast iron；grade A；not less than 48h | |
Rust resistance test | Single piece of cast iron qualified after 48h test | |
Cast iron lamination qualified after 8h test | ||
Defoaming property/（ml/10min） | ≤2 | |
Range of application:
◇SGR2342 is suitable for the processing of ferrous metals such as cast iron, carbon steel and stainless steel, to meet the processing requirements of cutting, drilling and tapping, milling, gantry milling, etc.
Application method:
◇After cleaning the liquid tank and the machine tool, the SGR2342 is mixed with water in a certain proportion according to the on-site process requirements; the prepared working liquid is added into the liquid tank, punched out with a pump and sprayed at the cutting part of the workpiece.
Engineer suggestion:
◇ Please clean the the liquid tank and the machine tool before the first use of the product . It is recommended to use pure water or tap water to prepare the working liquid.
◇ It is strictly prohibited to use groundwater, too soft and hard water quality, please contact our company in advance to obtain technical support.
◇ The cutting fluid system should have a good aluminum scrap and impurity separation system to keep the working fluid pure and clean.
◇It is strictly forbidden to mix with other grades of cutting fluid to maintain its excellent characteristics.
Storage/Transportation/Package:
◇ It should be sealed and stored in a dry, cool and ventilated warehouse to prevent sun exposure, rain and impurities. The recommended storage temperature is 5~35℃.
◇ Use proper loading and unloading tools to avoid damage to the package.
◇ Cover with tarpaulin during transportation to prevent direct sunlight.
◇ Under normal storage conditions, the shelf life of the product is 2 years.
◇ Specification: 20kg or 200kg.
Copyright © 2021.@欣格瑞（山东）环境科技有限公司 All rights reserved.
网站部分资源来源于网络，无法和版权者联系，无意侵犯，如有侵权请联系我们删除
备案号：魯ICP備09087608號
