qishiyingyuan.com-国产性色一区二区,蜜臀久久99精品久久一区二区 ,国产精品日韩精品欧美精品,97精品久久久午夜一区二区三区

品名：黑色金屬用全合成磨削液

型號：SGR2312

技術指標：

性能用途：

適用于鑄鐵、碳鋼等金屬材料的切削磨削。

產品特點：

具有良好的冷卻性、防銹性、低泡性、潤滑性、清洗性等特點，防銹期7-15天。

使用方法：

①推薦一般使用濃度：原液與水按1:20使用。

②使用（更換）新液時，應先將貯液箱（槽）及機床工作臺、裝夾具、鐵屑及污物清洗干凈。

③槽液的補充：當槽液需要補充時，加水的同時加入相應比例的本品原液，保持必須的濃度。

④工作液應保持清潔和通風，及時清除金屬屑和浮油等雜質。

⑤禁止與其他品牌切削液混用。

包裝貯存：

①本品應貯存于干燥、陰涼通風庫房內，貯運過程中應避免日曬、雨淋。

②18L/桶、200L/桶或根據客戶需求。

安全防護：

操作時注意勞動保護，應避免與皮膚、眼睛等接觸，接觸后用大量清水沖洗。

Full synthetic cutting fluid for ferrous metals SGR2312

Product Features：

◇SGR2312 is a water-soluble cutting fluid that is mixed with water to form a translucent liquid.

◇SGR2312 has excellent anti-rust, lubricating and cooling properties, as well as outstanding machining performance. The working fluid can extend the corrosion inhibition time effectively between processes under complex conditions.

◇SGR2312 can extend the tool life, ensure the workpiece surface machining accuracy effectively.

◇SGR2312 has a low odor and excellent anti-corrosion performance, with a long service life.

    Product parameters：

Range of application

◇SGR2312 is suitable for the processing of most black metals, with certain lubricity and long service life, and can be used for cooling, rust prevention and cleaning between workpieces.

Application method

◇After cleaning the liquid tank and the machine tool, the SGR2312 is mixed with water in a certain proportion according to the on-site process requirements; the prepared working liquid is added into the liquid tank, punched out with a pump and sprayed at the cutting part of the workpiece.

Engineer suggestion

◇Please clean the the liquid tank and the machine tool before  the first use of the product . It is recommended to use pure water or tap water to prepare the working liquid.

◇It is strictly prohibited to use groundwater, too soft and hard water quality, please contact our company in advance to obtain technical support.

◇The cutting fluid system should have a good aluminum scrap and impurity separation system to keep the working fluid pure and clean.

◇It is strictly forbidden to mix with other grades of cutting fluid to maintain its excellent characteristics.

Storage/Transportation/Package

◇It should be sealed and stored in a dry, cool and ventilated warehouse to prevent sun exposure, rain and impurities. The recommended storage temperature is 5~35℃.

◇Use proper loading and unloading tools to avoid damage to the package.

◇Cover with tarpaulin during transportation to prevent direct sunlight.

◇Under normal storage conditions, the shelf life of the product is 2 years.

◇Specification: 20kg or 200kg.