qishiyingyuan.com-国产性色一区二区,蜜臀久久99精品久久一区二区 ,国产精品日韩精品欧美精品,97精品久久久午夜一区二区三区

品    名：循環氨水破乳劑（水性）

型    號：SGR1702

一、技術指標：

二、性能用途：

本產品由超高分子量多支鏈水基破乳劑、有機聚合物破乳助劑和極性溶劑復配而成。產品含大量雙鍵σ體系，脒基、羥基基團封端，支鏈多，吸附捕捉能力強。能有效地改善油包水（W/O）或水包油（O/W）乳液的界面張力，使氨水內的油或膠體顆粒失去排斥力及吸引力，從而失去穩定性而形成絮體，更進一步通過化學橋聯，使分散在氨水中的細小油滴互相聚集而逐漸變大沉降。破乳性能優異，脫水脫鹽效率高、速度快、油水界面齊脫水性能好，脫后氨水油含量低，可以解決循環氨水與焦油的破乳分離問題。

三、產品用途：

適用于循環氨水系統的破乳脫鹽脫水，主要用作焦油脫鹽脫水裝置的破乳劑。

四、使用方法：

（1）將本產品泵入破乳劑儲罐中，用計量泵注入破乳劑管線上（也可以用小型計量泵直接從裝劑桶中注入到破乳劑管線上）。

（2）循環氨水焦油破乳投加量1.5-3.0mg/L。

（3）禁止與其它破乳劑復合使用，以免發生反應而堵塞管線。

（4）輸送時可選用橡膠管等高分子材料。

五、包裝、貯存與安全

（1）使用塑料桶包裝，每桶凈重25Kg,或者使用塑料噸桶包裝凈重1000Kg。

（2）本品應置于干燥、陰涼、通風處密閉常溫保存，有效期6個月。

       （3）其它信息請參閱MSDS。

demulsifierSGR-1702

Performance and use

This product is formulated from ultra-high molecular weight multi-branched aqueous demulsifiers, organic polymer demulsifier aids, and polar solvents. The product contains a large number of double-bonded σ systems, with amide groups and hydroxyl groups at the ends, featuring numerous branches that enhance adsorption and capture capabilities. It effectively improves the interfacial tension of oil-in-water (W/O) or water-in-oil (O/W) emulsions, causing oil or colloidal particles in the ammonia water to lose both repulsion and attraction, thus destabilizing them into flocs. Further, through chemical bridging, it causes fine oil droplets dispersed in the ammonia water to aggregate and gradually grow larger for settling. It exhibits excellent demulsification performance, with high and rapid dehydration and desalination efficiency, good simultaneous dehydration of oil and water interfaces, and low oil content in the dehydrated ammonia water, effectively addressing the demulsification separation issues of circulating ammonia water and tar.

Qualification

Product Usage

It is suitable for demulsification and dewatering of circulating ammonia water system, mainly used as demulsifier of tar dewatering and dewatering unit.

method of application

1. Pump this product into the demulsifier storage tank and inject it into the demulsifier line with a dosing pump (it can also be injected directly into the demulsifier line with a small dosing pump from the filling tank).

2. The dosage of circulating ammonia water based demulsification is 1.5-3.0mg/L.

3. It is prohibited to combine with other demulsifier to avoid reaction and blockage of pipeline.

4. High polymer materials such as rubber tubes can be selected when conveying.

Packaging, storage and safety

1. Use plastic drums with a net weight of 25Kg per barrel, or use plastic ton drums with a net weight of 1000Kg.

2. The product should be kept in a dry, cool and ventilated place at room temperature, valid for 3 months.

3. Please refer to MSDS for additional information.